Features & Benefits

Installation & Operation

1. Attach primer to centrifugal pump or skid.
   • Use non-collapsible hose or flexible tubing to connect primer suction inlet to pump.
2. Install cut-off valve between the primer suction inlet and pump.
3. Close cut-off valve immediately after priming.
   • Make sure primer drain valve is closed.
   • A cut-off valve should be used at the pump discharge to prevent air from being drawn through the discharge line while priming.

Maintenance

• Remove any debris under the diaphragm after each use.
• Clear all fluids from inside the unit after each use.